Tips On How To Extend Smok Pen Recharge Time
The Smok Pen is really a new pen that was developed by two guys in California. They wished to create a cool writing instrument that appeared as if a real pen but had the ability to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has taken the market by storm.
The Smok Pen includes a built quality that is just great. I found that even though it is an electronic pen the build quality is simply as good as any of the pens that I’ve reviewed. This is because of how they made the top cap. You don’t have to be worried about the cap cracking or breaking you Smok Valve Pen.
Both biggest differences that separate the Smok Valve from other pens may be the form of the coils and the way that they are built. Generally the coil on a Smok Pen is bigger than on other pens. I believe that they did this on purpose, to make the pen feel bigger.
Invest the a glance at a Smok Pen, you will observe that the body of the pen is round rather than smooth like other pens. On the trunk of the pen there exists a little tab that houses the coil. When you press on the tab it is simple to turn the heating element on / off. I really liked this feature because it allows me to use the Smok Pen 22 whenever I feel like smoking.
To utilize the Smok Pen it is advisable to keep the heat button pressed. After the button is pressed, the heating element will start to warm up. Once it reaches the appropriate temperature you can turn off the heating element. Smok recommends using a 22mm tank. I prefer a more substantial tank, but that’s just me.
When you put your Smok Pen in to the tank you will see a indicator light come on. The indicator light will stay green unless you put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen in to the charger before you apply the e-liquids to the coil heads. Additionally it is important to do this before putting your e-liquids in to the coil heads.
After you have completed this step, you should always check to see for anyone who is at the proper temperature for the coils to fire. If not then you should turn the power off and try again. When you are still not satisfied together with your Smok Pen i quickly suggest you take it set for some troubleshooting. This is exactly what I would call the “troubleshooting process” because sometimes things just do not work as they should. I would recommend that you perform the next two steps, then go ahead and check the Smok Pen to see if it still has the electronic charging port.
Prior to going any further you should take away the battery from your own pen and unscrew the magnetic cap. You should then remove the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body that is green in color. You should loosen this wire using pliers. After you have loosened this wire you can then access the sub-ohm. You should then remove the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch any of the coils.
After you have placed the sub-ohm tank into the pen you should then place all of those other components like the wattage, the batteries and the heating element into the included microwaveable microwave oven. Start the energy and follow the on screen instructions. You need to place the pen’s battery into the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it cool off. When you first put the pen in to the microwave the electronic reading Vape Pen Battery will show a low voltage protection setting. If this setting will not automatically get set then you should follow the on screen instructions.
Once the Smok Pen has already reached the temperature that it needs to reach you need to then connect both wires to the positive and negative on the positive post on the Smok unit. You need to then connect another end of the battery to the negative post on the negative side of the Smok unit. The ultimate step is to connect the positive cable to underneath of the Smok’s power switch.
After all the components have been placed in to the pen, you should turn the energy on. After the first test run, you ought to be able to start to see the battery life indicator light come on. If you do not see any sign of life from the Smok Pen, you should take away the battery from the pen and replace it with a brand new one. For your convenience there is also a green light which might be pressed so as to confirm the battery charging status. Once you have done these things and you do not see the green light indicating charging, you need to replace the battery.